XTOOL VAG401 OBD2 Scanner,VW/ AUDI/ SEAT/ SKODA Diagnostic

Description

XTool VAG401 is a Professional handhold diagnostic tool for VW, AUDI,SEAT, and SKODA Vehicles.
VAG401 OBD2 Scanner is the higher version based on VAS5053.Support from the year 1996 to 2016.
VAG401 support many system including engine,auto trans,abs brakes, auto HVAC, airbags and more.
XTOOL VAG401 also supports many functions including read and clear fault codes, basic setting,
and some special function such as oil reset and srs reset.

XTOOL VAG401 OBD2 Scanner Highlights :

1. Language:English, Deutsch, Espanol, Language can be switched directly
2. Support Potocols:KWP-1281 ,KWP-2000(ISO 14230), TP2.0 ,CANBUS and UDS Potocols.
3.Lastest V2016 Software installed ,no need any update

VAG401 OBD2 Scanner Functions:

* Retrieve controller information
* Read DTC
* Clear DTC
* View live data
* Actuation test
* System basic adjustment
* Adaptation
* I/M Readiness

Channel number function:

01 Engine electronics
02 Automatic transmission
03 Anti-lock brakes
15 Airbag
17 Dashboard
35 Central loclk
46 Central comfort module
16 Steering wheel
34 Level control
65 Tire pressure
08 Automatic air conditioning
44 Power steering
25 Immobilizer system
53 Parking bralke
55 Xenon lamp adjustment
56 Radio
76 Parking aid
47 Sound system
37 Navigation system

Special functions:(may not support for some models)

Battery matching
Gateway can
Battery regulation
Adjustment Injector
AirBag Deactivate/
Actiwate
ABS Bleed
Maintenance reset
polo
Touran
Other modle
Airbag reset
0dometer….

Xtool VAG401 Using Tips

Prime Fuel Pump after changing TDI fuel filter:
Diagnose > Common System > 01 Engine > 04 Basic Settings > 035 : Pump runs for 30 Seconds.
TRANSMISSION – Reset DSG Adaptives:

Transmission Tolerances (Engaged Calibration):
@ Operating Temp > Park > ER/Hand Brake On > Key On > Diagnose > Common System > 02 Transmission > 04 Basic Settings:
061 > Wait for any numbers to stop changing > Start Car > You’ll soon feel the gears cycle, wait for all #s to stop changing > ENTER > Engine Off
(8/30/15) Mine settled at 141, 128, 4, 1

Transmission Tolerances (Synch. Point. Measurement)
@ Operating Temp > Park > ER/Hand Brake On > Key On > Diagnose > Common System > 02 Transmission > 04 Basic Settings:
060 > Key On > Wait for any numbers to stop changing > Start Car > You’ll soon feel the gears cycle, wait for all #s to stop changing > ENTER
(8/30/15) Mine settled at 13, 0, 4, 1
DONE, release hand brake, turn car off or drive.

065 (Clutch pressure), all showed 0.00 PSI running or not, so do not know if/how reset.
062/067 – Clutch Adaptation, those numbers did not change. 062 is if Control Module Version is => 0800, else 067.
068 – Clutch Saftey Function, those numbers did not change either.
063 -Reset Values (Steering Wheel Paddle Installation); did not use.
069 -Reset Values (ESP & Tip Cruise Control Installation); did not use.