CK OBDProg Odometer Correction Tool+Key Programming

Description

CK OBDProg is a device that use to do key programming and Odometer correction.It communicates with a phone over Bluetooth. The device has no operable buttons and no display,All operation takes place in the HUIDAO CK app.

CK OBD Prog performs two tasks: reading immobiliser data and completing key programming, and reading, modifying and writing the internal data of the instrument cluster for instrument data repair.Part of the immobiliser data is computedon the server, so the phone needs to stay online during the job.

CK OBD-Prog Notices:

1. HUIDAO CK can be installed on Android V8.0 and iOS 13.0(or later)
2. Free 1 Year Update
3. supports CAN, CAN FD and DoIP protocols
4. 3 kinds configuration with different Function.

CK OBDProg Functions:

OBD Key Programming

• Generate OBD for programming from the model, model year and key type(mechanical key, remote control or smart key).
• Read internal data from the immobiliser control unit (IMMO / BCM / CAS and similar).
• Read the number and status of registered keys.
• Add keys, and reprogram after all keys are lost.
• Learn remote controls and smart keys (PEPS).
• Back up and restore immobiliser data.

Instrument Data Repair

• Read instrument memory data (EEPROM / MCU data area)
• Back up, modify and write data
• Repair needle zero position and display segment faults

Odometer Adjustment

Odometer Adjustment refers to the technical process of modifying or calibrating the mileage value displayed on a vehicle’s instrument cluster. In a legitimate context, it is performed to correct or replace a faulty odometer so that the new reading accurately reflects the vehicle’s actual accumulated mileage, or to document changes when a replacement cluster cannot retain the original figure.

Specifications:

1. Interface: OBD-II connector
2. Communication protocols: CAN (ISO 15765); K-line (ISO 9141, KWP2000); CAN FD (ISO11898-1); DoIP (ISO 13400)
3. Operating voltage: DC 9 V to 16 V (supplied by the vehicle OBD socket)
4. Wireless: Bluetooth Low Energy 5.0, range 3 m
5. Expansion ports: MCU read/write adapter interface on the rear (double-row pin header); two Type-C ports on the tail (left: RFID adapter, right: power supply)