Check Engine Codes Light Tool with obd2 scanner

The check engine codes are the codes pulled from an obd2 diagnostic scanner that determines the source of the problems in the vehicle.We would strongly recommend you get one Autel Maxidiag MD806 Pro for check engine codes on full System .

If your Check Engine Light is on and there are trouble codes in your computer, your vehicle will NOT pass an OBD II emissions test. The light must be OFF and there must be no codes in memory to pass an OBD II emissions test. In addition, all of the OBD II self-monitors that check for faults must have run and completed without finding any further problems to pass the test.

We list common check engine light codes for you on this page at the bottom. This isn’t a complete or exhaustive list of every code that could set in your computer’s memory.

• Powertrain (“P”) codes (engine, transmission and emissions systems)
• Body (“B”) codes (Climate control system, lighting, airbags, etc.)
• Chassis (“C”) codes (antilock brake system, electronic suspension and steering systems)
• Network Communications (“U”) codes (controller area network wiring bus and modules)

P0010-P0099 – Fuel and Air Metering and Auxiliary Emission Controls check engine codes

• P0010 “A” Camshaft Position Actuator Circuit (Bank 1)
• P0011 “A” Camshaft Position – Timing Over-Advanced or System Performance (Bank 1)
• P0012 “A” Camshaft Position – Timing Over-Retarded (Bank 1)
• P0013 “B” Camshaft Position – Actuator Circuit (Bank 1)
• P0014 “B” Camshaft Position – Timing Over-Advanced or System Performance (Bank 1) – See Trouble Code P0011
• P0015 “B” Camshaft Position -Timing Over-Retarded (Bank 1) – See Trouble Code P0012
• P0020 “A” Camshaft Position Actuator Circuit (Bank 2)

DTC Codes – P0100-P0199 – Fuel and Air Metering

1. P0100(check engine codes) Mass or Volume Air Flow Circuit Malfunction
2. P0101 Mass or Volume Air Flow Circuit Range/Performance Problem
3. P0102 Mass or Volume Air Flow Circuit Low Input
4. P0103 Mass or Volume Air Flow Circuit High Input
5. P0104 Mass or Volume Air Flow Circuit Intermittent
6. P0105 Manifold Absolute Pressure/Barometric Pressure Circuit Malfunction
7. P0106 Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance Problem
8. P0107 Manifold Absolute Pressure/Barometric Pressure Circuit Low Input
9. P0108 Manifold Absolute Pressure/Barometric Pressure Circuit High Input
10. P0109 Manifold Absolute Pressure/Barometric Pressure Circuit Intermittent
11. P0110 Intake Air Temperature Circuit Malfunction