Description
This is Multiecuscan 4.8 Crack Version ,REGISTERED with cheap Price ! Software only ,No interface included
FIAT Multiecuscan v4.8 is a vehicle diagnostic software with advanced functions. It allows you to perform various diagnostics tasks on the supported vehicles/modules.(ALFA ,FIAT,LANCIA,CHRYSLER,DODGE,JEEP,SUZUKI and EOBD)
In order to use the software you need an interface. The following interfaces are currently supported by the software: VagCom KKL 409, ELM327 (1.3 or newer), OBDKey 1.40, OBDLink, ELM Scan 5, CANtieCAR.
Bluetooth OBDKey, ELM 327 and OBDLink interfaces are fully supported but not recommended for special functions (like PROXI Alignment, remote control programming, IMA coding, etc.)!
08/11/2021 – Multiecuscan v4.8
– Added information for more ISO codes from 2015-2020 vehicles
– Added new PROXI configuration options
– Added support for standard EOBD diagnostics
– Added CAN Monitor / Vehicle Settings for 500, 500L, Panda, Punto 2012, Mito, Giulietta. It allows to set date/time on models with removed factory multimedia.
– Added support for Ducato 290 3.0 CNG
– Added support for Fiat Argo 1.0 (Brazil)
– Added support for Fiat Argo 1.3 (Brazil)
– Support for Bosch Motronic Me7.6.3 CF4/EOBD Injection (1.4 16V) (Grande Punto)
– Support for Valeo TU3 PSA CF4/EOBD Injection (1.4) (Qubo, Fiorino)
– Support for Valeo TU3 PSA CF5/EOBD Injection (1.4) (Qubo, Fiorino)
– Support for Parking control Valeo (3 channel) (500)
– Support for Magneti Marelli IAW 5SF CF6/EOBD Natural Power Injection (3.0 CNG) (Ducato 290)
– Support for Marelli SELESPEED CFC448F Automatic Gearbox (Ducato 290)
– Support for CAN Setup / PROXI Alignment Procedure (327) (Uno 2015)
– Support for CAN Setup / PROXI Alignment Procedure (341) (Mobi)
20/11/2020 – Multiecuscan 4.7
– Added information for more ISO codes from 2012-2020 vehicles
– Fixed PROXI alignment problem with DSCM and TBM modules on Stelvio/Giulia
– Fixed PROXI alignment problem with 1.0/2.4 engine modules on 500x/Renegade/Cherokee/Compass
– Added new PROXI configuration options
– Improved SCAN function to scan much faster the CAN-only vehicles
– Added VIN and HW/SW numbers to SCAN results
– Support for Radio frequency hub (RFHUB) Continental (Giulia, Stelvio)
– Support for Comfort rear seat (CRSM) Bitron (Giulia, Stelvio)
– Support for Active aerodynamic module LEFT (AAML) (Giulia, Stelvio)
– Support for Active aerodynamic module RIGHT (AAMR) (Giulia, Stelvio)
– Support for Power liftgate (PLGM) BROSE (Stelvio)
– Support for Radio frequency hub (RFHUB) Continental (500X, Renegade, Toro)
– Support for Radio frequency hub without keyless (RFHUB) Continental (500X, Renegade, Toro)
– Support for Haptical lane feedback (HALF) camera Bosch (500X, Renegade, Toro)
– Support for Driver assistant system (DASM) radar Bosch (500X, Renegade)
– Support for Radio frequency hub (RFHUB) Continental (Compass)
– Support for Blind Spot Sensor Autoliv (Left) (Compass)
– Support for Blind Spot Sensor Autoliv (Right) (Compass)
– Support for Marelli SELESPEED CFC419F Automatic Gearbox (Uno 2015, Mobi)
– Support for Marelli SELESPEED CFC428F Automatic Gearbox (Uno 2015)
– Support for Parking control Bosch (Uno 2015, Mobi)
– Support for Body Computer Continental (327) (Uno 2015)
– Support for Body Computer Continental (341) (Uno 2015, Mobi)
– Support for Driver assistant system (DASM) radar Bosch (Tipo, Egea)
– Support for TRW Airbag (Uno 2015, Mobi)
16/03/2020 – Multiecuscan 4.6
– Added information for more ISO codes from 2015-2019 vehicles
– Added “Speed limit” setting for CAN Monitor / Vehicle Settings
– Improved support for Battery pack control (500e)
– Fixed PROXI alignment problem with US 500 and Uconnect
– Support for Magna Q4 Transfer Case (Giulia, Stelvio)
– Support for Steering Lock TRW (Giulia, Stelvio)
– Support for Haptical lane feedback (HALF) camera Bosch (Giulia, Stelvio)
– Support for Driver assistant system module (DASM) radar Bosch (Giulia, Stelvio)
– Support for Engine sound enhacement module (ESEM) (Giulia, Stelvio)
– Support for Torque vectoring module (TVM) (Giulia, Stelvio)
– Support for Body Computer Delphi (EV) (500e)
– Support for Instrument Panel Marelli TFT (EV) (500e)
– Support for CAN Setup / PROXI Alignment Procedure (EV) (500e)
– Support for CAN Setup / PROXI Alignment Procedure (330 MY19) (500L 2019+)
– Support for Body Computer Delphi (263) MY15 (Doblo)
– Support for Parking control Valeo (Front & Rear) (Giulietta)
– Support for Bosch Motronic Me17.3.0 Injection (1.4 8V Brazil) (Uno 2015)
– Support for Bosch ABS/iTPMS (Uno 2015, Mobi)
Question 1 :
I got error message when install it “User installations are disabled via policy on the machine” ? how fix it
SOLUTION 1:
Start Local Group Policy Editor – gpedit.msc
In the Group Policy Editor select Computer Configuration > Administrative Templates > Windows Components > Windows Installer
In the Extended Properties pane, double-click Prohibit User Installs
Click Disabled (to enable installations) or Enabled (to disable installations)
Click OK and close the Group Policy Editor
Question2 : I got error says Your license key is not recognized as vaild on this Multiecuscan 4.8 Crack software
SOLUTION 2:Remove old version if installed and delete deleted every file related to multiecuscan, then install this version and follow instructions. I had the same problem, solved this way
Reviews
There are no reviews yet.