MINI DSG Reader,DQ200 and DQ250 GearBox Flash Tool

Description

MINI DSG reader is used to read and write latest dual-clutch DSG gearbox data for AUDI and VW on DQ200 and DQ250 gearbox.You don’t need remove ecu from car, only connect some plug to the DSG ECU and then you can read/write and save dump to bin flie.MINI DSG DQ200 DQ250 Reader supports both K-Line and CAN BUS vehicle.

MINI DSG Reader Newly added car models:

• AUDI Q7 BOSCH GS19 11 1MB
• AUDI RS6 BOSCH GS19 2MB
• S4 BOSCH GS19 04 1MB
• Daewoo Lacetti Denso v2
• Lotus Europa S Delco GMPT
• Opel Astra G Motorola GMPT E15
• Astra J Delco 5[v1]
• Astra J Delco 5[v2]
• Astra J Delco 5[v4]
• Opel Insignia Delco 5[V2]
• Insignia Delco 5[V3]
• Speadster Motorola GMPT E15
•  Zafira B Delco TP
• Vauxhall Astra G Motorola GMPT E15
• Vauxhall Astra J Denso v1
• Vauxhall Insignia Denso
• Vauxhall Zafira Motorola GMPT E15

How to connect MINI DSG reader(DQ200+DQ250) with Vehicles ?

Questions :
HELLO ALL , I Backup a DSG DQ250 from a Passat 2006 with Kess V2 (clone) and full bin size file is 448kb and also backup a Skoda TCU (2008) DQ250
But now im working in writing back the ORI file from Kess (Passat full bin file size 448k) with Mini DSG Reader ,but software DSG Reader gives an error file size is NOT correct and is expecting a smaller file (size 418k). any help? how to short / shrink the file? from (448k—>418k)?
I have tried a (418k size) file with sucess, but its stopping me revert to standard the TCU due to file size.

Answer :
write it back with kess V2,If you want to use dsg reader, you have to read dsg tcu with dsg reader and generate original file using file from kess.
DSG reader is using probably other protocol so size is different….