Buyer confirmed ,this clone SM2 PRO J2534 VCI working prefect with V2.21.32 Firmware,You need flash the firmware with ST-Link tool ,Upgrad from V2.21.22 to V2.21.32(2025/Feb)
After the updates,it provides improvements when using some software.Read This post how to flash firmware.
Here you can download the fixed firmware for clone SM2 PRO
Feedback:
- serial number changed. I tested on a Mercedes w204, everything is normal for now
- i updated my PCM Tuner HW to v2.21.31. all works well so far .
- In pcmflash module 71 it reads and writes exactly the same, tested and working.
- I tested it and the SM2 PRO VCI is visible in ODIS Engineering 17 and 18.2, as well as ODIS-Service 23.0.1 and 24.3 What seems to be fixed compared to 2.21.21 is that the ignition switch emulator popup finally shows up in ODIS.
SM2 Firmware Version 2.21.32 – February 4, 2025
- – J2534: CM3 fixed message timeout processing error (appeared in PCMFlash 58, 62, 79, 80, 82, 94 and other programs)
- – J2534: improved GPT signal generation algorithm for CM2/CM2PRO (for Renault EDC16C3, EDC16CP33 ECUs, etc.)
- – KAMAZ: added diagnostics of the CBEU unit 211.386700 with USD2.2 protocol
- – KAMAZ: SORL EBS variable names corrected
- – HAVAL: adjustment of the algorithm and training conditions of VVL F7/JOLION/DARGO
- – other changes
V2.21.31 – January 25, 2025
- – KAMAZ: added units SORL ECAS, SORL EBS(K5), SORL CM-ESC(Compass), BCM(Compass electrical package), ICM (Compass instrument cluster)
- – J2534: CM3 multiple improvements based on feedback on unstable operation with PCMFlash loaders (77, 53, 82 and others), Combiloader and others.
- – J2534: Renault ASOS dealer program did not work due to the ability to connect to CM2 as CM3 and vice versa (now you need to select the exact adapter model in all programs)
- – PAZ: Wabco JED677 did not work with CM3 adapter
- – other changes
Version 2.21.30 – December 13, 2024
- – GAZ: added body electronics ECU BCM A31R33.3765100 (Gazelle/Sobol NN)
- – GAZ: added ECU body electronics UHM A31R33.3765X10 (Gazelle/Sobol NN)
- – VAZ: support for units manufactured by NPO Itelma has been added to the ABS KESENS ECU
- – J2534: CM3 fixed the problem with 100% CPU core load in J2534 applications (Combiloader, PCMFlash, etc.)
- – RP1210: CM3 fixed bug with sending messages via J1939 protocol (found in Cummins Calterm)
- – other changes
2.21.29 – December 4, 2024
- – fixed a bug in version 2.21.28 that caused the PCMFlash program to crash in modules 71, 77, 92
2.21.28 – December 3, 2024
- – Added support for SM3 adapters
- – New USB driver supports ARM, ARM64 architectures
- – J2534: DoIP support for MB Xentry PassThru (W206, W223) for SM3 adapters implemented
- – J2534: Support for CAN-FD channels according to J2534-1 has been implemented for SM3 adapters
- – VAZ: PRIORA electrical package – on early firmware versions the program displays a warning about incorrect data issued by the ECU
- – Ravon: in version 2.21.27 the brand menu did not open
- – support for versions before Windows 7 has been discontinued
SM2 2.21.27 – November 27, 2024
- – VAZ: BCM Itelma unit added (Vesta NG)
- – VAZ: WLY CVT18 unit added (Vesta NG)
- – VAZ: added SRS ECU Conti –0954 (Xray, Largus, Granta)
- – VAZ: ESCL Worldtech unit added (Vesta NG)
- – VAZ: ECU BDFKE added IM control and support for different software versions
- – VAZ: MMC Enjoy fixed configuration item “Buttons”
- – GAZ: Foton Gxx ECU (MD1CS089) added support for new software versions
- – Greatwall: Jolion SRS fixed the function of switching to normal/factory modes
- – J2534: Fixed a bug that caused incompatibility with Windows XP
- – J2534: Fixed ignition emulator for Nissan Consult
- – J2534: added support for Renault Clip up to version V236
- – Android: fixed a bug that caused the recording of variables to be interrupted on some ECUs
- – Wabco: ABSEplus CAN new firmware versions added (08020205, 08020207)
- – Wabco: ECAS CAN2 new firmware versions added (108E0101)
- – KAMAZ, GAZ, PAZ: added ABS unit SORL ECU CM4XL-25VI-EDB
- – other changes
Version 2.21.26 – February 25, 2024
- GAS: added ECU M74.9 UMP
- VAZ: added ECU Multimedia EnjoY
- J2534: added support for Clip up to version V234
- J2534: updated ignition emulator function for ODIS latest versions (S-23, E-17)
- Android: added support for Android 14
2.21.25 – February 14, 2024
- – VAZ: ABS control unit KESENS C102 added
- – VAZ: added block of additional functions of body electronics (BDKFE 84500331101) Vesta
- – GAS: added engine ECU MD1CS089 Foton Gxx FD25 (Gazelle, Valdai)
- – Wabco EBS3: added diagnostics of Std EBS3.1 (4461352410), Std EBS 3.2 (4461352420), EBS3.3 (4461352460) units
- – KAMAZ: M240S1 corrected display of SCR temperatures, added variables for outputs, synchronization of KV-RV, etc.
- – R1210: Fixed bug with receiving ISO15765 messages (introduced in 2.21.23)
- – other changes
2.21.24 – December 26, 2023
- – UAZ: added ECM unit AECS D+ AY3201479
- – UAZ: added ABS APG block
- – MAZ: added Knorr-Bremse ELC5 unit (air suspension)
- – Greatwall: added diagnostics for HAVAL Dargo (all systems)
- – Greatwall: added various procedures for models H9, F7, Jolion (sensor training, etc.)
- – PAZ MD22: display of the status of discrete inputs has been fixed
- – KAMAZ: autodetection did not work
- – Hyundai: at 2.21.23 there was no connection with some units via K-line
- – VAZ: fixed display of service records on the M86 ECM
- – VAZ: fixed crash of the program when auto-detecting a vehicle with an M74K ECM
Version 2.21.23 – December 01, 2023
- VAZ: added support for ECU M74.8 and M74.9
- KAMAZ: added support for ECU M240.S1 CAN K5 P6 (diagnostics and programming)
- Greatwall: added diagnostics of Haval H9 cars (all units)
- Greatwall: added diagnostics of Haval Jolion cars (all units)
- Greatwall: DCM3.7 H6 injector coding procedure fixed
- Wabco ABS E4,E8: added steering position sensor (SAS) calibration functions
- J2534: Added support for UART Echobyte protocol
- J2534: Clip support up to and including version 232
- J2534: Added support for long messages via J1850 VPW
- other changes
Leave A Comment