Tactrix OpenPort 2.0 J2534 Passthru interface with Full chips

Description

Tactrix Openport 2.0 support Diagnostic and ECU Flashing for Toyota, Jaguar And Land Rover,Subaru ,Mitsubishi

The OpenPort 2.0 is our newest tuning tool hardware that is capable of communicating with most OBDII compliant vehicles using a standard J2534 interface. Combined working with EcuFlash software the OpenPort2.0 will reflashing ECU for newer Subaru and Mitsubishi vehicles.
With this High Quality Openport Interface (Black PCB and Gold Pins),You will be stable use it special on Programming Job that won’t broken the ECU.

High Quality OPENPORT 2.0 Highlights :

1.2022 version OPENPORT ,New full chip and new module plan, Very stable and fast high speed .
2.Fixed problem that dead after 1 or 2 times used,No need worry again
3. New PCB with inductance to increase voltage, suitable for tuning car under different voltages.
4.Use the software and driver from CD ,otherwise it will broken

Disconnect Internet when use it,otherwise it may locked!!

Tactrix Openport 2.0 Passthru Interface Features:

1.Tactrix Openport 2.0 can works for Toyota Techstream, JLR SDD Diagnostic OEM Software work prefectly .
2. Supports these protocols:CAN 2.0 (CAN/ISO15765) and K-line (ISO9141/ISO14230(KWP2000)/dual K line)
3.Work with ECUFlash software will do ECU Flash job on Subaru ,Mitsubishi Vehicles.
4.As Passthru J2534 Interface it able setting to work for Xentry , ODIS (VAG),IDS (Ford /Mazda) and ECUFLASHER by ALEX…etc,But required Yourself Installed ,we do not provide service.
5.Tactrix Openport 2.0 is compatible work with PCMFLASH 1.20 Dongle

ECU Flash Vehicles Supported by OpenPort 2.0

Tactrix Openport  Reviews :

1.I did a test reflash with BRZbeta ECUFLASH my stock .bin file and the openport wote to the ECU ok,it took about 98seconds to write the ROM .Current ROM definitions look quite usable.

2.this clone Tactrix openport Works great and very cheap cost! Activated cruise control on Lada Granta fl.