Description

GODIAG GT106 PLUS adapter can convert heavy truck voltage from 24v to 12v, Then You can use OBD2 diagnostic tool working on Trucks,Such like Thinkdiag,DBScar5 bluetooth scanner .Finally it protect that 24V voltage burned the diagnosis machine .
What’s more,Update from Godiag GT106, 2024 version GT106 PLUS addly fuel injector cleaning & testing and relay testing. The function will work on both cars and trucks.

GODIAG GT106 PLUS adapter Functions

Convert the 24v voltage into 12v voltage .
Convert The 24v truck k-line communication protocol into the 12v k-line communication protocol.
When inputting 24v voltage, the screen will display the input voltage is 24v, manually pop up the switch button.
When outputting 12v voltage, the screen will display the output voltage is 12v, manually press down the switch button.
The communication protocol indicator light shows that when the device is communicating, and it can display the communication status.
Relay Test for both cars and heavy duty trucks.
Fuel injector testing/cleaning for both cars and heavy duty.

GT106 PLUS Relay Test

When the car’s headlights, turn signals, horn and the engine starter do not work, if there is no problem with these components after detection, you can check the relay switch.
After the relay is removed from the car, connect the adapter based on the connection of the relay.

Fuel Injector Test

(Note: Use a 24v 8A power supply to test the fuel injector of the truck and the time should not exceed 120s.)

When the vehicle has difficulty in starting, acceleration and fuel consumption, etc, it is necessary to check the fuel injector.
When detecting the fuel injector, if the fuel injector is driven to open or close, the ammeter shows the normal value and the fuel injector woks normally,
it means that the fuel injector is normal. Otherwise,the fuel injector is damaged.

Fuel Injector Cleaning

When the fuel injector is blocked, the fuel injection is not smooth. There are carbon deposits and thick sticky substance in the gap of the fuel injector.
The designed fuel injection volume or atomization effect cannot be achieved, it needs to be cleaned.

1)Prepare a fuel injector cleaner pressurized can or a carburetor cleaner pressurized can(nozzle diameter of the pressurized cans: 4mm)
2)Hold the manual cleaning tool tightly with your hand, and firmly fix the fuel injector with your fingers to prevent the pressure of the cleaner can from washing away the the fuel injector.
3)Pay attention to the hazards of liquid to human body during manual cleaning, and take protective measures. Do not operate in dangerous places with open flames because the pressurized cans are extremely flammable.
Choose an open place to facilitate the discharge of cleaning liquid.)