Best Xentry Passthru J2534 Interface

For most user’s points ：

• Original Scanmatik 2 Pro is without a doubt the leader,but more expensive.No problem on 24v trucks.
• SM2 Pro clone from China will be most cost-efficient.
• Clone Openport 2.0(High Quality ones) also a good choose that only cost 20USD. it will broken if conenct internet that would headache,also it only work on 12V.

Here some test reports on different J2534 adapter:

1)Original Scanmatik 2 Pro USB
Battery: OK
Duration of the 5 steps: 0 min 51 sec
Reading the control units: 50 Modules

2) Openport 2.0 gloden PCB ones
Battery: OK
Duration of the 5 steps: 0 min 57 sec
Reading the control units: 41 Modules

3) SM2 PRO VCI
Battery: OK
Duration of the 5 steps: 1 min 01 sec
Reading the control units: 41 Modules

4) VAS 5054A
Battery: NO OK
Duration of the 5 steps: 0 min 55 sec
Reading the control units: 41 Modules (for controller SAK or SAF-XC161CJ-16F40F)
Reading the control units: 32 Modules (for controller SAK-XC167CI-XXXX)

5) GM MDI
Battery: OK
Duration of the 5 steps: 1 min 05 sec
Reading the control units: 41 Modules

6) VCM II Ford
Battery: OK
Duration of the 5 steps: 1 min 05 sec
Reading the control units: 41 Modules

7)Eucleia Wiscan T6
T6 passthru tested with Das/Xentry 03.2020 in Smart 451 EV.
Battery voltage OK.
Fast communication.
Adaptation, Specials functions and programming Works.