/, New Arrival, OBD2 Diagnostic Scanner/GODIAG GT100 OBDII Break Out Box &ECU Connector

GODIAG GT100 OBDII Break Out Box &ECU Connector

$95.00

Description

GODIAG GT100 OBDII Break Out Box 

GODIAG GT100 is a testing platform for OBDII protocol communication detection and ECU maintenance, diagnosis, programming & coding. It will greatly help a user to connect the ECU module , also it will tell us whether the diagnostic scanner can normally send out signal.

GODIAG GT100 Features:

1. OBDII Protocol Detector & Communication Detection

1). Connect GODIAG GT100 to the OBDII diagnostic port of the car.
2). When the device displays the voltage, turn on the power switch of GODIAG GT100.
3). Then connect to the diagnostic tool, when the tool is communicating with the car, the LED indicator of corresponding protocol will light up or flash. ( If the CAN protocol is detected, it will have the maximum brightness. When the communication is successful, the corresponding CAN-H and CAN-L will dim or twinkling weakly)

2. ECU connection: single module connection
GODIAG GT100, connected to a single ECU module, is convenient for a user to do the single-module diagnosis and programming.
Godiag GT100 connect ECU directly

1). Connect the ECU with the color jumpers. (If the ECU is CAN protocol, please check whether you will need to connect a 120 ohm resistor.)
2). The Godiag GT100 can be powered by connecting to the OBDII diagnostic interface of car, or by an AC power adapter.
3). To diagnose and program for a single ECU by connecting the diagnostic tool or ECU programmer.

3. Banana plug extension connection:
Extend the car’s OBDII 16pin interface to tell you whether the OBDII interface connection is good or not, which is convenient for the test of OBDII interface voltage waveform.

4. Convert OBD1 diagnostic interface to the standard OBD2
Use the connector to convert the OBD1 interface into obd2 interface according to the diagnostic interface communication protocol.

GODIAG GT100 convert OBD to OBD16 pin
5. Connect multiple ECU control modules at the same time, which is convenient for the professional engineers to detect and maintain.

6. When to use the extension cables:
The space of the diagnostic interface location is too narrow to connect to the diagnostic tool, or the user find that the diagnostic cable is not long enough during maintenance. It can be extended by 1.2 meters.

7. Able to power the car when replacing the used battery.

1). Prepare battery A to supply power by connecting to No. 16 / 4 / 5 holes of Godiag GT100 & to the OBD2 diagnostic interface of the car.
Notice
*Turn on the power switch of Godiag GT100.
*Don’t turn on the ignition switch, don’t start the car.

2). Then replace the brand-new battery B with the used battery in the car, which will ensure that the car has fully power to prevent data loss and audio lock-up or the malfunction due to lack of power to the ECU control module.

GT100 supply Power when change Battery

8. GT100 OBD2 Break out Box will convert the OBD1 port of special truck to the standard OBD2 diagnostic port according to the protocol.

GODIAG GT100 convert truck obd port to OBDII diagnostic port

 

Read this post to know more infomation about how to us the GODIAG GT100 Break out Box .

Reviews

There are no reviews yet.

Be the first to review “GODIAG GT100 OBDII Break Out Box &ECU Connector”

Your email address will not be published. Required fields are marked *

0
    0
    Your Cart
    Your cart is emptyReturn to Shop