//KTM67IN 1 ECU Programmer&KTM200 ECU Chip Tunning Tool

KTM67IN 1 ECU Programmer&KTM200 ECU Chip Tunning Tool

$269.00$339.00

SKU: N/A Category: Tag:

Description

Do not Connect Internet when use the KTM Programmer ,otherwise it will be locked !!!!

KTM 32 IN 1 =KTMBENCH V1.20 +KTMOBD V1.20 +KTMFLASH V1.95(Activated 32 Licenses : 12 13 14 19 20 21 26 29 30 32 33 34 35 36 40 42 46 47 52 53 54 55 57 58 61 62 63 66 71 72 73 74
KTM 67 IN 1 =KTM32IN 1 +extra 35 License(also name as KTM200 )
(Activated 67 Licenses :1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,29,30,31,32,33,34,35,36,38,40,42,43,45,46,47,48,50,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74  Modules 39, 41,49,51 not activated)

KTM 72IN1 =KTM67 IN 1 +5 Modules  (PCMFLASH 72IN1 WORKABLE LIST)

MEDC17 Programmer new addly modules:

  • Bench mode: Bosch MEDC17 based on TriCore microprocessor.
  • Bench mode: Bosch MDG1 based on Motorola MPC5777
  • Bench mode: Bosch MDG1 based on Aurix TC2xx microprocessor
  • Bench mode: Bosch EDC16 based on Motorola MPC5xx microprocessor.
  • Bench mode: VAG MED9 based on Motorola MPC5xx microprocessor (Other brands using ME(D)9 currently not supported)

You can update your older KTM32IN 1 Programmer( or KTMBENCH ,KTMOBD,KTMFLASH) to newest KTM67 IN 1 ,But required ship back the Dongle .
Or buy the KTMFLASH67 IN 1 Dongle (259USD) then no need ship back 

 

KTM67 in 1 ECU programmer Highlights:

1. With Newest Firmware
2. Compared with the old KTAG, the new hardware version has added 490 new protocols, updated 687, and added 200 Bosch ECU read and write protocols without opening the cover.
3. Compared with the old KTM100, the new KTM200 has added 379 new protocols, updated 374, and added 200 Bosch ECU read and write protocols without opening the cover.
4. The KTM67in 1 programmer allows you to forcibly write (forcible clone) without checksumming and supports forcibly reading and writing unknown ECUs with supported chip models.
5. Newly 200 Bosch models, read and write MED/EDC17 protocol without open the cover

PCMFlash 67IN 1 ECU Programmer Features:

1. Read and write ECU data.
2. ECU clone.
3. ECU parameter adjustment
4. ECU maintenance engineering
5. chip turing
6.OBD2 reading
7.cover-free wielding-free no disassembly data reading, greatly reduce the risk of destroying the ECU, bench style.
8.cover-opening data reading, boot style
9.Read ECU maps
10.Checksum correction
11. stage1-3, gearbox tuning , LC, sportdisplay , immo off, adblue off, dpf off, dtc off ,vmax ,swirl off
12.Read flash and ep files
13.Powertrain adjustment

Newly Added ECU, MED/EDC17 Read and Write without Opening the Shell:
VAG Simos 12.1, 12.2
VAG Simos 18.1, 18.2
VAG Simos 18.10
VAG Simos PCR2.1
FCA GPEC2, GPEC2A, GPEC4, GPEC4LM
Hyundai/KIA SIM2K-240, SIM2K-241,SIM2K-250, SIM2K-251, SIM2K-260, SIM2K-305, MT86
Ford/LR SID208 Flash read
FCA Marelli 8GMK/8GML, MJ9DF, 10GF
FAL Marelli MJ8DF/8F2, 8GMB/8GMC/8GMF/8GMW/8GSF/8GSW
Scania EMS S8 BAM. Just 3 point PCB connection into VIA holes. Can be connected without removing gel.
BMW MSD80, MSV80, MSD81, MSD85.0/MSD85.4, MSD85.1/MSD85.3, MSD87.1/MSD87.2, MSV90
PSA SID208
MB SID307, SID310
Renault SID307, SID309, SID310
Porsche SDI21.x
Mitsubishi E6T83XXX, E6T32xxx
Isuzu Transtron SH72544R
Isuzu Transtron L4.3
Hino EDC7UC31
Hyundai, Greatwall DCM6.2AP
and other…

KTM67IN 1 ECU Programmer supported 67 Modules List :

ktm67in 1,pcmflash 67in1 modules list

Module 1
Ford Focus 3

Ford Focus 3: 1.6L Sigma Ti-VCT 85/105/125PS (EMS2204)
Ford Focus 3: 1.6L, 2.0L PowerShift TCM (6DCT250)
Virtual reading, writing, checksum correction. VBF writing and VBF to BIN conversion is supported!

Ford Focus 3: 2.0L Duratec GDI Ti-VCT 150/170PS (MED17)
Ford Focus 3 ST: 2.0L Ecoboost GTDI 250PS (MED17)
Reading, writing, checksum correction.

Module 2
Ford Kuga 2, Ford Explorer 2011+

Ford Focus 3: 1.0L Ecoboost 2015+ GTDI 100/125PS [FV6A] (MEDG17)
Ford Kuga 2: 1.6L Ecoboost GTDI AWD 150/182PS (MEDG17)
Ford Mondeo 5: 1.5L Ecoboost GTDI AT 150/180PS (MEDG17)
Ford Mondeo 5: 2.0L Ecoboost GTDI 200PS (MEDG17)
Ford Explorer 2011-: 3.5L Ecoboost V6 GTDI 360PS (MEDG17)
Ford Kuga 2: 2.5L Duratec Ti-VCT 150/171PS
Ford Mondeo 5: 2.5L Duratec Ti-VCT 150/171PS
Ford Explorer 2011-: 3.5L Cyclone V6 Ti-VCT 294PS
Reading, writing, checksum correction

Module 3
Diesel engines 2.0L, DCM3.5/DCM6.1/SID206

Ford Focus 3: 2.0L DW10C STAGE 5 140/163PS (DCM3.5)
Ford Kuga 1: 2.0L DW10C STAGE 5 140/163PS (DCM3.5)
Ford Kuga 2: 2.0L DW10C STAGE 5 140/163PS (DCM3.5)
Ford Mondeo 4: 2.0L DW10C STAGE 5 140/163PS (DCM3.5)
Virtual reading, writing, checksum correction.

Ford Mondeo 4: 1.8L Lynx, 2.0L DW10C STAGE 4 (SID206)
Ford Mondeo 5: 2.0L DW10F STAGE 5/6 150/180PS (DCM6.1)
Ford Focus 2: 1.8L, 2.0L Duratorq Lynx/DW10C (SID202/SID206)
Reading, writing, checksum correction.

Module 4
Petrol engines 1.25-1.6L, Ford Fiesta 2008+, Ford Mondeo 4

Ford Fiesta: 1.25L, 1.4L Sigma Ti-VCT (EMS2102)
Ford Fiesta: 1.6L Sigma Ti-VCT (EMS2101)
Ford Mondeo 4: 1.6L Sigma Ti-VCT 110/125PS (EMS2101)
Reading, writing, checksum correction.

Ford Fiesta: 1.6L Sigma Ti-VCT USA [AE81] (EMS2205)
Writing, checksum correction.

…….. Module 74

 

Reviews

There are no reviews yet.

Be the first to review “KTM67IN 1 ECU Programmer&KTM200 ECU Chip Tunning Tool”

Your email address will not be published. Required fields are marked *

0
    0
    Your Cart
    Your cart is emptyReturn to Shop