Description
LAUNCH X431 IMMO PLUS integrates powerful IMMO programming, full-model system-wide diagnosis with special functions. It is the best choice for intelligent maintenance of the IMMO matching tool in repair shops.
X431 IMMO PLUS = X431 IMMO ELITE +ECU CODING FUNCTION +FCA AUTOAUTEH+VAG GUIDE FUNCTION
X431 IMMO PLUS Highlight:
1. Comes with X-PROG3 to do Key Programming
2. Engine Module and Transmission Module Cloning
3. Anti-theft matching for Mercedes-Benz, BMW, Audi, Volkswagen and Porsche
4. All Key lost for Audi and Volkswagen.
5. All System Diagnosis + 39 More Reset Functions + ECU Coding + Active Test
6. VAG Guided Function
7. FCA AutoAuth Access
8. Global version No IP limited and Two Years Free Update
9. 22 Kinds of Languages Support.
LAUNCH X431 IMMO PLUS Functions:
IMMO PIN code reading
Adding keys and all keys lost matching without removing the 4th generation OBD of Volkswagen
Ford IMMO (data synchronization) initialization
Nissan B18 IMMO replacement without password
Lost Toyota keys
Lost all Volvo keys
Lost all Peugeot keys
Citroen key lost/module replacement
BMW ISN code reading and writing
bmw key matching
BMW 6/8HP gearbox erase
Porsche key matching
Mercedes-Benz key matching (FBS3)
Mercedes-Benz key increase calculation password (FBS3)
Mercedes-Benz key lost calculation password (FBS3)
Benz engine, erase gearbox (FBS3)
Benz lock replacement (FBS3)
The Mercedes-Benz gear module erase (FBS3 and before)
Mercedes Engine Block Clone (FBS4)
Mercedes-Benz Gearbox Module Clone (FBS4)
VW Audi MQB Engine, Gear Box, Steering Column Replacement
VW Audi BOSCH engine clone
VW Audi Siemens engine clone
Adding and all keys lost for the fourth-generation instrument of Volkswagen Online
VW online fourth-generation meter MQB keys added and all keys lost
Volkswagen fourth generation instrument (5ND920873B) replacement
UDS engine replacement function after 14 years, fourth-generation instrument + fifth-generation Bosch engine (no need for the original car engine)
BOSCH ECM Clone
CONTINENTAL/SIEMENS ECM clone
DELCO ECM clone
Bosch TCM clone
ZF TCM clone
GETRAG TCM clone
Temic TCM clone
DELCO TCM clone
BOSCH ECM clone
CONTINENTAL/SIEMENS ECM CLONE
DELCO ECM clone
Bosch TCM clone
ZF TCM clone
GETRAG TCM clone
Temic TCM clone
DELCO TCM clone
bmw key matching
BMW engine ISN code reading and replacement
BMW BOSCH engine clone
BMW Siemens engine clone
BMW E chassis 6HP, 8HP gearbox erase
BMW E chassis 6HP, 8HP gearbox clone
BMW F/G chassis 8HP gearbox erase
BMW F/G chassis 8HP gearbox clone
BMW (CAS1, CAS2, CAS3, CAS4, FEM/BDC) Replacement
Porsche key matching
Martha mileage adjustment
Mercedes-Benz key matching (FBS3)
Mercedes-Benz key increase calculation password (FBS3)
Mercedes-Benz key lost calculation password (FBS3)
Benz engine, erase gearbox (FBS3)
Benz lock replacement (FBS3)
The Mercedes-Benz gear module erase (FBS3 and before)
Mercedes Engine Block Clone (FBS4)
Mercedes-Benz Gearbox Module Clone (FBS4)
Launch X431 IMMO Plus Work with XPROG-3:
In order to get a new key, an experienced lo-cksmith together with LAUNCH IMMO PLUS programming tool can offer programming services chips/remote key fobs/transponder to perfectly match the settings of your car. LAUNCH IMMO PLUS programmer also has access to manufacturer’s pin codes that 100% meet the preset specifications set by the manufacturer. Especially working with the X-PROG3 Immobilizer & Key Programmer, LAUNCH IMMO PLUS enables key chip reading & matching, key generation, ECU clone, etc., to be easily and effectively.
Advantages of PROG-3 Programmer Brings for LAUNCH IMMO Key Programming Tool:
Engine ECU Module Clone & Replacement ( for 5000+ Models)
Gearbox ECU Module Clone & Replacement ( for 5000+ Models)
Remote Control Matching / Key Generation / Key Learning
Read/Write Key EEPROM, MCU, Engine, Immobilizer
Backup & Restore Bosch/Siemens Engine ECU Programming Data
VW & Au-di Key Learning/All Lost
5th-Gen. Au-di (0AW/0B5) Gearbox ECU Replacement
5th-Gen. VW UDS engine ECU Reading, Writing & Clone
Mercedes-Benz Key Adding/All Lost
Mercedes-Benz IMMO ECU Data Wiping
Mercedes-Benz Infrared Key Reading/Writing
BMW Key Adding/All Lost; ECU Replacement
BMW E chassis 8HP Gearbox ECU Data Wiping
Porsche Key Adding/All Lost; ECU Replacement
Read BMW Engine INS Code
ECU CODING:
Every automobile actuator has a record code in ECU, which is the basis for automobile computer to mobilize their work. LAUNCH X431 IMMO ELITE PLUS is equipped with advanced ECU coding function for addressing the following issues :
Component Matching:
After you change the bad actuators or certain parts, you need to use this function to make a new code and recognize the new actuators.
ECU Online Coding:
ECU coding enables multiple car systems to recognize each other and then the actuators can start to work.
Personalization:
Unlock hidden features,deactivate annoying features.
OE-Level Full System Diagnostics
LAUNCH X431 IMMO Plus automotive scanner can scan 120+ modules like ECM(engine), TCM(Transmission), ABS, SRS, Brake System, BCM(Body Control Module), EPS(Eletronic Power Steering), HVAC(Heat, Ventilation and Air Conditioning), TPMS(Tire Pressure Monitor System Reset) and so on to perform OE level diagnostics to read and clear codes, view live data stream, and retrieve ECU information, matching & adaptations, ECU Coding, allows you to get a faster and more accurate test result on all electronic systems.
Bi-Directional Control
LAUNCH X-431 IMMO Plus automotive scanner can perform Bi-directional Control over various car systems and components to determine the integrity of a system or parts like ABS, SRS, window, door, roof, by reading the ECU data, or by monitoring the operation of the actuators.
Turn on the radiator fan
Turn on/off the cooling fan
Open/close windows
Operate mirrors
Turn on/off the lights
Turn on/off the sound horn
Test door lock actuators
A/C Compressor Activation
Modulate the throttle
Compression test
And More…
39 Service Functions:
X-431 IMMO Plus Advantages:
1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for fifth-generation Audi (0AW/0B5) gearboxs.
4. Supports reading, writing & cloning of the ECU for fourth-generation VW UDS engines.
5. Supports BMW E chassis 8HP gearbox ECU program wiping.
6. Support Mercedes(Engine, Gearbox, EIS) and BMW(Gearbox) ECU IMMO data erase.
7. Supports 170+ Bosch, 10+ Siemens engine ECU and 18+ gearbox ECU BENCH mode clone.
– Bosch engine ECU: ME17, MED17, EDC17, MEVD17, etc.
– Siemens engine ECU: BMW(MSV90, MSD87, MSD85,MSD81, MSD80), Mercedes(SIM271DE2.0,SIM271KE2.0), VW/Audi(SIMOS8.6x,SIMOS8.5x,SIMOS8.4x), etc.
– Gearbox ECU: DQ200-MQB, DQ250XX, DL501 Gen1,VL381,VGS2- FCVT,VGS-FDCT,DQ400E,DL501 Gen2,DL382-7F,VGS2-FDCT,9G_Tronic,DQ380,DQ381, DQ500,AL551,AL450,AL552,AL951,8HPXX, etc.
X431 IMMO PLUS Package Includes:
1pc x X431 IMMO PLUS 8 inch tablet(4+64G Android10 )
1pc x DBSCAR7 VCI
1pc x X-PROG 3 immobilizer programmer kit
1pc x Diagnostic cable kit
1pc x Password envelope
1pc x Type-A to Type-C USB cable
1pc x Power adaptor
Reviews
There are no reviews yet.