Here we Free share Autocom/Delphi 2020.23 software cars+trucks!!
We highly recommed you use this Single Board AUTOCOM /Delphi work on Newest 2020.23 and Firmware 3201
It works only on new vci (6 digit serial like 100251 clones or any serial number)
Read below details and try test ,Beware the risk under yourself.
Autocom 2020.23 Nativate Installation :
https://mega.nz/file/AGpVwAiS#1pmYXEjXzPVlCUhnvpPO_-sEU64Zkxi0tq4dN_GEA0I
If install ask password then put ThankYou
Pay 5usd to get activate code HERE
After Install and activation ,Run Programmer under “ADMIN” if truck software not load
VMWARE IMAGE :
If you want try on 2020.23 on Vmware machine ,then use these files
1.Vmware V16 ,if you get erro “Intel VT-x disable “ ,Go BIOS setting Intel virtualization technology to “ENABLED “(may under security, or advanced , CPU Setup ) ,different computers different BIOS setting menu
https://download3.vmware.com/software/wkst/file/VMware-workstation-full-16.2.0-18760230.exe
2.VMWARE V16 keygen (if you not found on internet ,then email i will send u )
3.Autocom 2020.23 VM file torrent (File about 5.52GB .7Z zip),i usually use utorrent to download ,very fast .
4.Firmware 3201 /3200 for Single PCB Delphi/Autocom
5.Interface recovery manuals
https://www89.zippyshare.com/v/YJb67vTA/file.html
Delphi DS150E Hardware recommended :
1.Best Interface would be the High quality One Board Autocom or Delphi ,You can use the last 3201 Firmware .
Update firmware steps :
1) Backup older firmware first :go to Program Files > Autocom > Firmware –backup
2).Copy 3201 firmware files to “Program Files > Autocom > Firmware Folder” after that to go Autocom Software and click on Upgrade Firmware
2.If you have the 2 boards version Delphi/Autocom ,Do not update to 3201 firmware that it wont work properly(some cars won’t communication) ,better leave it with 1622 FW
Question 1 :
I’ve installed the program but only Autocom Cars is available, not Autocom Trucks. The shortcut is there, but it opens Autocom Cars.. Anyone has any ideea why?
Answer 1 : make a copy from cars shortcut (copy and past) and then on new one right click, properties and change to “C:\Program Files (x86)\Autocom\Main.exe” trucks
Then you can change the icon and name to trucks. Don’t forget to run as Administrator…
Question 2
this is not working i use win 10 64 but i dont know what the problem is but after i put the license i installing and desapear the executable files cars and trucks….and i cant use it
Answer 2 :
for .exe files to go missing, it is obvious that your antivirus is detecting them as a irus and either deleting them or putting them in quarantine, so look in your quarantine folder, restore them, then choose to add the .exe files as an exemption from scanning and detecting.
Question 3
After activate the DELPHI 2020.23 Software,the Programmer not start ,Splashscreen appears shortly and then nothing happens ?
Answer 3 :
1.Try change your date to regual and run the instalation pack .exe again ,if not fix try step 2 .
2. Check whether installed well M Visual C++ 2010 Redistributable, M SQL Server Compact 4.0 and Net Framwork 4.5.
Question 4 :
I have all VC+, SQL, .NET installed on my Win10 H2H2,But AUTOCOM 2020 Software still not start even i found the main.exe run on task manager ?
How fix it ?
Answer 4 :
The problem almost caused by .NET 4.8 installed .You need manually remove it and put .NET 4.5 back ,also You need remove Windows update KB5011048
You can google about how remove/Disable .NET 4.8 and KB5011048
After you uninstall it then reboot machine ,The autocom software will start to work again .
Or you can try install Autocom 2021 on Your Win10 or Win11 ,that should no any problem.
Dzień dobry,
Mogę poprosić o hasło?
Pozdrawiam
Rosłoniec Tomasz
PASSWORD IS ThankYou
HAVE WRITE ON THE POST , YOU SHOULD READ IT MORE CAREFULLY
parola la keygen
You can download keygen from the link on post and activate it yourself with that code
The password you entered is not correct
Which password you says not correct ? Installation DELPHI2020 password ?
AC 2020.23 keygen setup final
Email me the XML file i try activate for you
[email protected]
I installed and tried to run AC 2020.3 Keygen, it asking password.
What is the password for the AC 2020.23 Program?, i did try ThankYou , but did not work
I’ve tried to enter Password for for AC 2020.23 Keygen but it says “The password you entered is not correct”. The password I’ve entered was ThankYou
Password ThankYou, in not ok for AC 2020.23 Keygen setup final
wie ist den die mail adresse für die installation?
gruss
mic
when installation you can put yourself email address
the keygen password is not working i tried a few times
Hasło nie działa pozdro
pass is ROD-&-LOKI
PASSWORD IS ThankYou
I have put ThankYou when ask for password its says incorrect ?
ThankYou is password for install delphi software , keygen is another password
Hello,
what is the password to unzip:
5.Interface recovery manuals
https://www89.zippyshare.com/v/YJb67vTA/file.html
Thank you very much.
Regards
unzip password fantomel
Hallo ich habe Delphi 2017 bis gestern hat ganz normal funktionieren jetzt hab ich neue Windows installiert und jetzt reagieren nicht mehr auf Aktivation Code können sie mir bitte helfen?
Danke
PLS SEND THE XML FILE FOR ACTIVATE
I downloaded it then it says email so I have added my email and not recieved an email. Then it goes to the page where you put an activation code and I have no code and even I did it isn’t allowing me to type anything.
You can email the ID ,i generate the activate code for you [email protected]
https://youtu.be/k-ypB93dQkQ can u help me? idk whats wrong…
have other version delphi software installed ?
yeah, i have allready instaled 2015 version
MAY YOU NEED NEW INSTALL ON ANOTHER WINDOWS ,THAT OLDER FILES EFFECT IT
Tahnk you!
It’s pleasure
Send me torent link
[email protected]
The Main starts but after a few seconds the main aborts. I see the delphi screen and thats it.
Ich brauche License key
the program frozen . and I dont now how solved the problem
thankyou
grazie non funziona
Where can download keygen from??
Cant find it in the post?
Nainstaloval jsem,pustil jsem cars a mám tam v menu pouze loading a nenaskoci výběr vozu.dekuji vám míč za odpověď.
i have a problem with the ctivation key can anybody create for me a code please
YOU CAN PAY 5USD AND EMAIL ME THE SYSTEM ID
Hi looking for activation code
AUTOCOM DELPHI 2020.23 Software for Cars and Trucks is works with my old delphi cable year 2015????
YES NO PROBLEM IT WORK YOUR OLDER DELPHI INTERFACE
JUST IF 2 BOARDS ONES DO NOT UPDATE FIRMWARE
IF 1 BOARD YOU CAN UPDATE TO LAST VERSION FIRMWARE
Hallo ich brauche die activierung code bitte per mail senden damit ich es freischalten kann
system identification Alak8dGM2PzuGTGe2UCEz9Tuj1Wb6I4-HndPJYm8fxE
Hi Sir
You need pay 5usd to http://www.paypal.me/obd2diag/5
or
https://www.obd2sales.com/product/autocom-delphi-2020-23-activation-service/
Hi Alex,
all installation process done and program is working. Keygen for final activation also worked. well done & many thanks for putting all this together!!
i didnt get some activiation code
You need email me the system id
I can’t unzip the file. Password ThankYou not work.
ThankYou is the Install password foor autocom 2020. i think may you want unzip code for Interface recovery manuals ,then that code would fantomel
password is ThankYou but is useless
it does not work to complete the installation without some research on internet on how to get the license from an kygen activator
ThankYou is password when install ,You can pay 5usd to get activation code
passvord = ThankYou
Programm does not start after installation, “main.exe” is resident in Task-Manager, but nothing happens. Maybe not working on a Win11-Lenovo-Lap? Also tried Compatibility-Mode, reinstall, as Admin etc.
.NET, SQL,VC++ ,these 3 programmers not installed
which obd cable is best to connect this software to my laptop.Thanks
AUTOCOM CDP Single Board will best interface
gracias por el aporte
both software are delphi CAR.Only the shortcut is called delphi truck, but main.exe opens delphi car
Can i get it to work with my 107333 VCI?
Yes but need go autocom files find the SN.TXT and edit the Serial number from 100251 to yourself
HI
for 2020 after clicking cars i’m asked for an email address, what should i use?
put any email
How do i get the licence key for this download, i am stuck there?
place order here obd2sales.com/product/autocom-delphi-2020-23-activation-service/
Om jag köper en ny dator kan jag då flytta licensen eller måste man skaffa en ny
YES DIFFERENT COMPUTER DIFFERENT SYSTEM ID AND DIFFERENT LICENSE CODE
Hey Alex. I have just installed Delphi 2023. I have installed everything good by the video . When i try to connect to the car i get the message AN INTERNAL ERROR has OCCURRED . What can it be ?
Hi my name is James
Looking for password for for auto com cdp+
Install passwod is ThankYou
the password doesnt work
do you ask install password or activate code ?
Hi everyone please how to download this Logiciels
If I have old device 1532, can I safety change firmware to 1622 ?
Yes no problem
Hello,can I send ThankYou to you and you send me the key? And if it works,I send 5€